Posts Tagged ‘drive’
Xbox 360 DVD Drive Malfunction
September 5th, 2010
Hitachi-LG DVD drive (ROM 0059DJ) in a v1 Xenon Xbox 360 console. Drive refuses to stay closed, even ejecting after the system is powered off. System suffered from an E74 error when it was given me. The system’s previous owner dropped the console out of frustration (hard enough to crack the case), so I suspect this has something to do with it. I was able to fix the E74 error with a heatgun, but I can’t figure out what to do about the DVD drive. UPDATE: For anyone interested, fixed it by fully disassembling the drive, removing the tray and spinning the gears a bit, then ensuring that the tray was fully closed and the manual eject lever was fully returned to the most forward position. I believe the manual eject was the only real issue. When manual ejecting, you’re pushing in a white plastic lever. This lever lowers the motor platform that the disc sits on and then pushes the tray out. Pushing the tray back in on my own (or powering the drive and using the eject feature) wasn’t enough to get the lever back to it’s fully-forward position, and therefore wasn’t enough to make the platform to raise back to full height. As a result, the disc was not being grabbed between the platform and the magnet and even spun at all, causing the system to simply eject the disc. So, if you’re getting this problem, try just pushing the motor platform/carriage/whatever all the way upward and making sure that lever is where it’s supposed to be. Of course, after all this work and then flashing the …
More Related Sites
How to Fix a Xbox 360 Phillips Benq Dive Full video
August 23rd, 2010
Website: www.XboxSlave.com Twitter www.Twitter.com Facebook:www.Facebook.com This is a guide i made for all those suffering from Broken Disc Drives and Scratched games. benq fix. www.XboxSlave.com
More Related Sites
Posted in Xbox 360 Videos | 
Tags: 360, bain, benq, broken, cd, clean, cracked, death, disc, drive, dvd, e74, fix, flash, flashing, gears, Guide., how, lights, microsoft, no, of, part, part3, Phillips, red, ring, rod, RRoD, scratched, Slave, the, to, unreadable, war, Xbox, Xboxslave, your | 
25 Comments »
Open your xbox 360 / Remove DVD Drive
August 3rd, 2010
This is a short video of how you can remove your dvd drive from your xbox 360. Also an informative video of how to open the case to do your own repairs! Thanks and enjoy watching
More Related Sites
xbox 360 3 red light fixed case 3
July 28th, 2010
hi this is the 3rd xbox 360 case fix ive done, iv’e added a flushed top fan over one of the heatsinks plus a new fan on the side, also re-made the vent on the front ( to duct away the heat via a fan inside over the other heatsink) now been running now over 8 months no red lights at all! (started out getting 2 red light and loud fans then 3 red lights)
More Related Sites
Posted in Xbox 360 Videos |
Tags: 1080p, 120gig, 360, arcade, blades, case, clamp, clamps, clear, death, drive, Elite, fans, fix, Fixed, gamertag, gears, halo, hd, hdd, hdmi, how, lights, loud, microsoft, mod, modified, nxe, of, overheating, perspecs, PlayStation, ps3, red, ring, RRoD, scene, sega, slot, sony, to, two, war, warranty, Wars, Xbox, Year |
25 Comments »
XBOX 360 Hard Drive Data Migration Transfer Cable
July 28th, 2010
- Brand New from Microsoft
- Cable Only
Product Description
This is an Xbox 360 Hard Drive Transfer cable It is new, the buyer will receive a new It includes one transfer cable, This cable will help your to allows you to transfer the content from one Xbox 360 Hard Drive to another Xbox 360 Hard Drive… More >>
XBOX 360 Hard Drive Data Migration Transfer Cable
More Related Sites
how to open an xbox 360 cd drive
July 22nd, 2010
-PLEASE READ- I AM NOT RESPONSIBLE IF YOU ATTEMPT TO OPEN YOUR XBOX 360 DIK DRIVE, OR XBOX 360 AND BREAK IT IN ANY WAY, THEREFOR, DONT BLAME ME- -DO THIS AT YOUR OWN RISK- -THIS WILL VOID THE WARRENTY- a video showing how to dismantly an xbox 360 cd drive. video included, manual not, kitchen sink not included. no refunds.
More Related Sites
« Computer Safety TipsHow To Fix Xbox 360 open tray error – doesnt DETECT cds
July 19th, 2010
i open it, put a cd in, close it, it says reading for a bit, then says open tray again. i can play it perfectly fine, in fact right now it has the sides top and bottom off and im playin it, but i still have to tap it to get the motor going -*UPDATE*- i recently got the red ring, and im probally going to get a new one. even if i do fix the red ring, i still have to pound on it. ill try getting ms to fix it for free, if not ill pull the money out of my ass to buy a new one. if any of you want to donate to the killjoy charity good deeds donation, just tell me! MSFTL (microsoft for the lose) -*UPDATE*- i bought a new one, and now after returning that one and getting a new one (:P) iv been doin fine. hopefully you guys follow my example, cause theres no way its gonna fix itself.
More Related Sites
xbox 360 dvd disc drive won’t stay closed possible fix!!!
July 15th, 2010
Here I am showing my xbox 360’s strange behavior…the disc tray will not stay closed…I make it work by pulling up on the spindle that spins the disc drives, and quickly throwing a cd and magnet on it…the laser only turns on after I pull up on it…very strange…anyone have a permanent fix? perhaps i’ll need to take it apart and adjust something…
More Related Sites
xbox 360 hitachi dvd drive bumping after spindle clean
July 10th, 2010
Updated, READ!!! Unmodded 360 from 2005 with Hitachi GDR-3120L 47DJ that worked great, then suddenly 100% “unreadable disc.” I did end up repairing it, and it’s worked great since June 2008. Here’s my history. I think it’s a decent order to follow if you can’t get a warranty or professional repair. But especially now that you can transfer DLC, I would just mail it to MS rather than cracking the case and doing all the tedious tuning. Try canned air – attempt to clean the laser lens. Disassemble 360 and clean laser w/ alcohol. Check if spindle magnet has come loose and is stuck to the top (common problem), and if laser lights up. If your discs aren’t spinning (can’t hear them): Run DVD w/o cover, see if discs turn, try a “push start”. Mine didn’t. Spindle moves easily after I cleaned and relubed motor/spindle follwing these BAD instructions: youtube.com Those instructions are missing a critical step. Mark the 3 screws with a sharpie and note how many turns to tight before you dissasemble the spindle. They control the hight and tilt of the disc relative to the laser. If you end up not knowing the right height (like me), mark the screws anyway, then try different adjustments. Full tight is safe, but probably won’t work. Too loose will make the disc rub – don’t use your favorite game. Start with CDs – those are easier to read. I ended up around 1 turn loose from full tight on the two screws that have springs. Also, test with CDs first – those are easier to read first. Another …