How to fix a wired xbox360 controller
August 26th, 2010
this video will show you how to repair a wired xbox 360 controller with scissors and tape watch no 2
X-Box 360 Repair Reviews
Get your XBOX 360 Repaired in Just a Few Hours – It is Really EASY GUYS!!!
August 26th, 2010
Posted in 
Tags:
hey my controller when i plug it in i flash for one seconde then it gose off do you know whas wrong with it
Ummmm… Well not sure, if you have any cut or exposed wire on the cord I suggest doing what I showd in the vid but if not open it and see if ther is any unusual wires or metal that could cause it to short circuit. If still nothin wrong I suggest you cut it from one inch away from the USB end to one inch away from the controller so you are left with one inch of wire sticking out of the controller and USB with one inch of wire sticking out.
@big67355737718113 continuing…. Then u get the long cable that you cut off and remove all the wires from inside and simply replace the same amount of wires on the inside with brand new ones and for the mesh copper around the wires just use two wires like in the vid and you can also use the same cable casing so basicly you replacing the wires in the middle, it’s same as in video just longer amount. Make sure each wire conection is taped of individually or will short circuit.
mine is when i plug it in it does not turn on can u help me
@RockGamer123 Ok well look for any exposed wires any at all or if you can feel any damage inside the whole cable once you find something unusual cut the area damaged then rejoin (like in the vid) or open controller and look at were the cable is attached to the chip and see if there is any wires touching or anything snapped and simply rejoin or separate the wires. If that doesn’t work it could be the USB or the USB port . Hope that helps
mine is fucked up the usb part is
When I Plug my controller in two lights go on instead of one, number one and four just stay frozen, can you help me please? x
@TheFibreGame That’s what is happening to me, but not all the time. Since mine is pretty much pressured sensitive now i can’t really move it that much or it says that it is disconnected. And then it starts to freeze up. It must be the part where you plug it in (USB) So what you should do is, try getting a new part of that. It could be expensive but try buying it through ebay.
there are 7 screws, i almost brike mine because i didnt know there was one under thasticker in the middle